Haier QPHR50, Руководство пользователя и инструкции по установке

Страница: 8 / 24

8
49- 5000429 Rev. 4
E
N
G
L
IS
H
USING THE DEHUMIDIFIER
Water Level
The dehumidifier will t urn off aut omat ically when t he bucket
is full, or when t he bucket is removed or not replaced in t he
proper posit ion. The bucket must be replaced in t he proper posit ion for t he
dehumidifier t o work. The light will be on and t he dehumidifier
will not run if t he bucket is not in t he proper posit ion.
Bucket Operation
DO NOT remove t he foam piece and magnet block in
t he bucket assembly. If removed, t he Dehumidifier will
not work properly.
When t he coil is defrost ed, t he compressor or fan will
aut omat ically rest art and dehumidifying will resume.
Removing Collected Water (cont)
To Install Hose:
Push in hose and gently pull to make sure it is
secure. Should not be able to be removed. You should hear a
“click” that lets you know the hose is inserted correctly.
To Release Hose:
Press the blue button on top of the connector
attached to the dehumidifier and pull the hose out to remove. Be
sure to turn off the pump before removing the hose.
NOTE:
DO NOT kink or crimp hose, as it can block water flow.
Insert
Press
Pull