manualshive.com logo in svg

Haier PBFS21EDAB, Руководство по обслуживанию

Поделиться
Скачать
Haier PBFS21EDAB Скачать руководство пользователя страница 9

CONTROL AND DISPLAY SYSTEM

5HIULJHUDQWTXLFNGHHSIUHH]HUHIULJHUDWLRQVHWWLQJ

E

L

The function of quick-deepfreeze refrigeration is to refrigerate the food completely in the shortest
 time.Press Button E, the refrigerant quick-deepfreeze refrigeration button indicating lamp will be
lighted, and the refrigerator will be in the refrigerant quick-deepfreeze refrigeration state, and the 
refrigerator will be out of the refrigerant quick-deepfreeze refrigeration state after it enters the 
refrigerant quick-deepfreeze refrigeration state for 4 hours; if you want the refrigerator to be out 
of the refrigerant quick-deepfreeze refrigeration state forcefully after it enters the refrigerant 
quick-deepfreeze refrigeration state for three hours, you can press Button E again, and the
 refrigerant quick-deepfreeze refrigeration button indicating lamp will be out, and the refrigerator 
will be out of the refrigerant quick-deepfreeze refrigeration state.

&KLOOFROGVWRUDJHTXLFNGHHSIUHH]HUHIULJHUDWLRQVHWWLQJ

Press Button L, the chill-cold storage quick-deepfreeze refrigeration button indicating lamp will be
 lighted, and the refrigerator will be in the chill-cold storage chill-cold storage quick -deepfreeze 
refrigeration state, and the refrigerator will be out of the chill-cold storage quick -deepfreeze
 refrigeration state if the chill-cold storage temperature is 2 F lower than its designed temperature;
 if you want the refrigerator to be out of the chill-cold storage quick -deepfreeze refrigeration state, 
you can press Button L, and the chill-cold storage quick -deepfreeze refrigeration button indicating 
lamp will be out, and the refrigerator will be out of the chill-cold storage quick -deepfreeze
 refrigeration state.

When the refrigerator is in the refrigerant quick-deepfreeze refrigeration state and in the
chill-cold storage quick -deepfreeze refrigeration state, within the set time, the process of
refrigerating remain constant without turning off the machine.

Note

Содержание PBFS21EDAB





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды