79
Sote@
Yo prevent the different oil into the pipe2 please use the special tool for W:76F2 especially for
gauge manifold and charging hose4
Rark the refrigerant type in different colour on the tank4 W:76F is pink4
Rust not use the charging cylinder2 because the W:76F will change when transferring to the
cylinder4
\hen charging refrigerant2 the refrigerant should be taken out from the tank as liquid state4
Rark the counted refrigerant volume due to the distributing pipe length on the label4
*=J F<9 D9:D=;9D5AF C=C9
Nn operation2 the pipe will vibrate and expand or shrink4 Nf not beingfixed2 the refrigerant will
focus on one part to cause the broken pipe4
Yo prevent the central stress2 fix the pipe for every 839m4
Sote@ Kor FZ8>8KMJWF2 when pipe diameter is <49;2 if the pipe length is within 7;m2 additional
refrigerant is unnecessary4
Rodel
88488
7?46;
7;4>>
784=
?4;8
<49;
649;
648;
647=
6477
646;:
64688
additonal refrigerant charging per meter.kg5m/
charge when
out of factory
84<kg
:4>kg
;46kg
FZ8>8KMJWF
FZ<6SKNJWF
FZ:>SKNJWF
H4 Wefrigerant charging and additional charging
F4 Hharging amount when out of factory excludes the refrigerant in the pipe4
G4 Yhe unit only is charged the standard volume of refrigerant .distributing pipe length is 6m/4
Fdditional charging amountCactual length of liquid pipe x additional amount per meter liquid pipe
Fdditional charging amountCQ7
L
649;1Q8
L
648;1Q9
L
647=1Q:
L
64771Q;
L
646;:1Q<
L
64688
Q7@ total length of 88488 liquid pipe Q8@ total length of 7?46; liquid pipe
Q9@ total length of 7;4>> liquid pipe Q:@ total length of 784= liquid pipe
Q;@ total length of ?4;8 liquid pipe Q<@total length of <49; liquid pipe
:4>kg
FZ:>8KNJWF
Honnectionwire
Qiquid pipe
Meat insulator
Las pipe
Fdhesive tape
over 86cm
+95F =AEG?5F=BA
Las pipe and liquid pipe should be heat insulated separately4
Yhe material for gas pipe should endure the high temperature over
786
O
4Yhat for liquid pipe should be over =6
O
`
Yhe material thickness should be over 76mm2 when ambient temp4
is 96
O
2 and the relative humidity is over >6,2 the material thickness
should be over 7;mm4
he material should clingthe pipe closely without gap2
then be wrapped with adhesive tape4 Yhe connection
wire can not be put together with the heat insulation material and
should be far at least 86cm4
Nnstallation procedure
Содержание MRVII-S AU282FHERA
Страница 2: ......
