Haier LE32N1620, Руководство пользователя

Страница: 17 / 56

O peration
Haier LED HDTV EN-16
M u te
1
Press the
M UTE
button on the remote control and
an icon indicating the MU TE function is active will
display on the screen. At this time, the sound of the
TV set is turned off.
2
To restore sound, press the M UTE button again or
press the V O L+ button.
S A P Broadcasts S et up
This TV can receive M T S stereo programs and S AP
(S econdary Audio Program ) that accompanies the stereo
program if a station transmits an additional sound signal.
When the
M TS button on the remote control is pressed,
the TV will only receive the signal if the TV station
transmits the proper signals.
M ono sound is automatically received if the broadcast is
only in M ono, even if S tereo or S AP has been selected.
S elect M ono if you want to listen to mono sound during
stereo/ S AP broadcasting. S tereo or S AP can be received
in an analog channel.
1
U se the M T S button to select your desired M T S
mode in an analog signal.
Each time you press the M TS button, M ono,
S tereo or S AP appear. I f other languages are
available in the digital signal, select them with
the
M TS button.
2
Press the EXIT button to save and return to TV
viewing.
C h a nn el me nu
1
This TV set has two methods to set the channels :
C hannel S can and C hannel S kip.
2
I n this section, using the remote control to set the
channels is e x plained. You can also use the buttons
on the TV to set the channels.
Note
The C hannel M enu is only accessible when the
input source is set to TV.
C h a nn el S ca n
1
Press the M E N U button and then use the
/ button to select the TV menu.
2
Press the / E N TE R button to select A n te nn a .
3
Press the / button to select Air or Cable mode.
4
Press the / button to select C h a nn el S ca n .
5
Press the / E N TE R button to start searching.
6
To cancel searching, press the EXIT button.
Note
When
Air
is selected, the TV will detect antenna
signals and will search for N T SC ( analog ) and AT SC
( digital ) TV channels available in your local area.
When Cable is selected, the TV will detect signals
supplied by your cable company. I t will search for
N T SC and Q A M modulated channels available in
your area.