Haier L32A6A, Руководство по эксплуатации

Страница: 5 / 12

7 8
PREPARATION FOR REMOTE CONTROL
3
2
1
+ +
Remote control installation
1. According to the figure display below, place the remote control with face down,
then open the cover of battery apartment.
2. As in the figure display below, install two AA batteries. (The + and - symbol of
battery must match with the marks on the remote).
3.Close the cover of battery apartment.
Cautions for using remote control
Confirm there is no object between the
remote control and the remote sensor
of TV set.
Sunshine or other strong light will
interfere the signal sent by the remote
control. In this situation turn the TV
set to avoid the direct light source.
Do not put the remote control in direct
heat or a damp place, or potential
damage to the remote may occur.
Please use two AA 1.5V batteries.
Do not mix battery types.
Install the batteries as the correct
polarities.
Do not use the rechargeable batteries.
SOUND BOX INSTALLATION INSTRUCTIONS
1. Place the LCD TV with installed
base well, take out the sound box
from packing box, take out two
connecting blocks of sound box,
eight screws and two connecting
wires of sound box from accessory
bag, as figure (1).
2. Refer to figure (2) display (LCD
back view figure), fix the two
connecting blocks of sound box
on the back cover of LCD TV by
using four yellow screws.
3. Refer to figure (3) display (LCD
back view figure), fix the
connecting blocks of sound box
and back cover of sound box by
using the remaining four black
screws.
4. Refer to figure (3), clip the two
connecting wires of sound box as
figure display into the up and
down four connecting wire cards
separately, the sound box is
finished installing.
Connecting block
of sound box
Sound box
Figure (1)
Two yellow screws
Two yellow screws
Figure (2)
Two black screws
Two black screws
Connecting wires
of sound box
Figure (3)