6
Listening to iPad / iPhone / iPod
This model adopts different iPad / iPhone / iPod models.
1.Insert your iPad / iPhone / iPod into the docking port by placing the connector on the bottom of the
iPad / iPhone / iPod onto connector in the docking bay.
Caution :
Please be careful when seating the iPad / iPhone / iPod into the docking to avoid
damaging the 30-pin connector on the iPad / iPhone / iPod or in the docking
system.
2.Press the POWER button once to turn on the unit .
Note :
Press the POWER button which will toggle between iPad and AUX-IN mode.
3.Press the POWER button until iPad mode is selected, the power status indicator lights on.
From your iPad / iPhone / iPod :
To start playback music, press the PLAY button.
To pause the music , press the PAUSE button.
When a song playback, press and hold the / button to perform high speed search
forward / backward.
To skip to next or previous song, press the / button.
From the main unit :
You may press the / - button to adjust the volume to a desired level.
Note :
The volume level cannot be adjusted by the volume control of your iPad / iPhone / iPod
after being docked.
4.To turn off the unit, press and hold the POWER button until the power status indicator lights off.
When the unit is powered by the external DC adaptor and once the iPad / iPhone / iPod connected to
the docking port, the unit recharges the iPad / iPhone / iPod battery.
Listening to an External Audio Source
The unit provides an auxiliary audio signal input for connecting external audio device.
1.Connect an audio cable (not included) with 3.5mm stereo plug to the AUX IN jack located at the back
of the unit.
2.Connect the other end of the cable to Line Out jack or Headphone jack of your external audio device.
3.Turn on the external audio device.
4.Press the POWER button once to turn on the unit.
Note :
Press the POWER button which will toggle between iPad and AUX-IN mode.
5.Press the POWER button until AUX-IN mode is selected, the power status indicator blinks.
6.The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary
device as usual.
If you're connected the Line Out Jack of your external device then you only need to adjust the volume
control of this unit. If you're connected the Headphone Jack of your external device, then you may need
to adjust both the volume control of your external device and the volume control of this unit to find the
most desirable volume setting.
Press and hold the button turning off the unit when you finish listening.
Don't forget to switch off the power of your external device as well.
Note :
C
M
Y
CM
MY
CY
CMY
K
EN6.pdf 2010-11-16 20:31:36
