Haier HYCD-282, Руководство по обслуживанию

Страница: 10 / 19

HYCD-282/282A/282C_Service Manual
10
Alarm test
：
in lock status
，
press this button to inquire alarm code
；
in unlock status
，
press this button
，
all the LEDs show“8”
，
which is used for checking LEDs
；
Silence
：
alarm pause
；
Defrost
：
in unlock status
，
press this button for 5 s
，
the forced defrosting function will work
；
in unlock status press this
button again to stop defrosting
。
Method for adjusting and setting temperature on the cabinet:
1. Unlock
If the “lock” indicator lamp is on, all buttons are locked except “ ”. By holding button “ ” for 5s, F0 is
displayed in display area of temperature in the cabinet, and the digit “0” flashes. Then press “ ”, F1 is displayed, and by
pressing button “ ”, the keyboard is unlocked and the room temperature is displayed on the display panel. In case of no
button operation, the keyboard will automatically locked.
2. Temperature setting
In the state of being unlocked, press the button “ ”, L0 is displayed on the display screen, and digit “0” flashes. By
pressing the button again, the default temperature of 5
℃
set for the refrigerator and -40
℃
for the freezer are displayed on
the displayed screen, and the second digit flashes on the display screen. (if it is not used for the first time, the temperature
set last time will be displayed). By pressing button “ ”, the flashing digit changes, and by pressing “ ” the value of
the currently flashing digit can be changed. Adjust to the required temperature, and by pressing “
” again, the set value
becomes valid and is stored. Temperature setting range: 0~16
℃
for refrigerator and -10~-45
℃
for freezer.
3. Setting high temperature alarm
After being unlocked, press button “ ”, L0 is displayed on the display screen and digit “0” flashes. Then by pressing
button “ ”, L1 is displayed on the display screen. By pressing button “ ” again, the default temperature set for high
temperature alarm is displayed on the display screen and the second digit of the default value of temperature flashes (the
default temperature set for high temperature alarm is +5 in the cabinet. Notes: the “ ”before the number displayed is for
“+”), and then press “ ”.
4. Setting low temperature alarm
After being unlocked, Lo is displayed on the display screen and digit ‘0’ flashes. By pressing button “
” twice, L2
flashes on the display screen. Press button “ ”, and the default temperature set for low temperature alarm is displayed on