Haier HWM70-918NZP Скачать руководство пользователя страница 2

2

Safety precautions

Contents marked with that symbol are actions forbidden to 
perform. Performing of those actions may result in damage 
of the machine or injure the personal safety of the user.

Forbidden sign

Contents marked with that symbol are related to the safety 
of the product and the personal safety of the users. Please 
operate in strict conformity to the contents, otherwise it may 
cause damage of the machine or injure the personal safety 
of the user.

Warning sign

Meaning and description of the symbols

Please check if the power receptacle has good earthing condition before using to guarantee 

your safety.
Please check if the water faucet is open, and if the connection of the water inlet pipe is 

proper.
It is suggested to use foamless washing powder.

Please don’t use the washer in the environment below 0 °C; if the washer has been stored 

below 0°C, please be sure to ensure the washer is placed under the room temperature 

for 2~4 hours and then use otherwise the washing effects may be lowered or the 

washer may be damaged.

Please insert the power cord into special receptacle with rated voltage. 

Be sure to use single-phase three pins receptacle.The earthing terminal of 

the receptacle must be earthed reliably. If possible,please adopt electric 

leakage protector.
The washing machine must be positioned so that the plug is accessible. Be 

sure to pull the plug off and close the water faucet in following cases: power 

failure, delivering the machine, setting the machine idle or cleaning the 

machine.
Do not plug or pull the power plug with wet hand.

Do not bend ,extend, twist, bind or alter the power cord by force. Do not press

or nip it with weight.

Keep the pin of the power plug clean, if the power plug is polluted with dust, 

please wipe with dry cloth carefully.
If the supply cord is damaged, it must be replaced by the manufacturer or its 

service agent or a similarly qual

ifi

ed person in order to avoid a hazard.

Do not let the machine share one receptacle with other 

electric appliances. If the plugging into the receptacles 

loose, do not use the plug any more.

Содержание HWM70-918NZP

















Отзывы: