14
1
2
3
4
Cleaning the lint
fi
lter:
Push down the spring piece at the top of the lint
fi
lter to make the claws out of the
fi
lter cover,
and then pull out the lint
fi
lter to get it down.(figure 1)
Put the lint
fi
lter into
fi
lter cover, and make it tight .
Make sure the lint
fi
lter well installed, or it can in
fl
uence your use.
Pull the back cover of the lint
fi
lter, and then you can get down it off the front cover of the
lint
fi
lter.(figure 2) Sweep the rubbish in the lint
fi
lter.Put the back cover of the lint
fi
lter into
the front cover .
Filter cover
Lint filter A
The lint filter must be used during washing.
It must be cleaned in time after each using.
Figure 1
Figure 2
Notes:
The
fi
lter screen of the water inlet valve is likely to be blocked by foreign materials and
in
fl
uence the water inlet. Please clean it with brush every two
months.
If the cabinet is dirty, wipe it with wet cloth
Do not
fl
ush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
After washing, close the water faucet.
( If needed, you can dismantle the water inlet hose).
Do not store water in the washing machine for a long period.
Drain the water completely after each using.
Be sure to pull off the power plug before maintenance.
Hang up the power cord and drain hose.
Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid
for some time ( about 1 hour), then close the top lid.
