Haier HWM70-1201 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 20

Haier HWM70-1201 Скачать руководство пользователя страница 18

18

maintenance

dispLAy codes

DISPLAy CODES AND SPECIAL fUNCTIONS

¬ power-off memory function: in case of abrupt power failure or the need to cut off the power during a program cycle, the present
settings will be saved and the preset operation will resume when the power is on again.

coDes

causes

soluTions

err1

¬ Door is not properly shut.

_ shut the door properly.

err2

¬ Drainage error, water not emptied within 6
minutes.

_ clean the filter and check the drain hose for blockage. if error
still exists, please contact the maintenance personnel.

err3

¬ Temperature sensor not properly connected or
damaged.

_ contact the maintenance personnel.

err4

¬ heater error (appears at the end of a cycle).

_ reduce load and then start washing again. if problem still
exists, please contact the maintenance personnel.

err5

¬Water level not met in 8 minutes.

¬The height of the drain hose is below 80 cm.
¬ The drain hose is in water.

_ make sure that tap is turned on, and water pressure is normal.

if problem still exists, please contact the maintenance personnel.
_ install drain hose within 80-100 cm of height.
_ make sure the drain hose is not in water.

err6

¬ motor error.

_ contact the maintenance personnel.

err7

¬ motor error.

_ contact the maintenance personnel.

err8

¬ Water exceeds protective level.

_ contact the maintenance personnel.

end

¬ end of wash cycle.

1:25

¬The remaining time is 1 hour 25 minutes.

19:25

¬status information:preset time for delayed operation.

unb

after the last rinsing cycle finishes,spinning fails completely due to unbalance of the laundry.

«
...
16
17
18
19
20
»

Содержание HWM70-1201





















Отзывы:

Нет отзывов