Haier HWM65-1128NZP, Руководство пользователя

Страница: 15 / 20

15
It displays “--” during detecting.
It displays remained reserve time (hour).
It displays abnormal symbol in abnormal situation.
Press the button to select the reserve time (2h-24h).
Press the button can display the reserve state.
J Reserve,remain time digitron
I “Delay” button
Steps of using the operation buttons and description of each step
1. Push “Power” button to switch on the power
2. Push “Program” button to select suitable full-auto program
It has the special power resume function. In the case of power failure or the power plug is loose
during running , the machine can save the running program, and resume the program after the
power supply is recovered. You do not need to set the program again.
After the power is switched on, “Normal” is automatically set. To select other full-auto
programs, please push the “Program” button till the corresponding indicator is on. Refer to
the “Program” button on Page 13.
When a standard cycle is selected, the fuzzy program is run. The water level and the washing
time can be selected according to be texture and volume of the laundry. The washing cycle is
automatically controlled.
Press “Reserve Water” button to keep rinsing water;
H “Reserve Water” button
When Reserve Water mode is selected, the washing machine will keep rinsing water after each rinsing with
buzz and voice indications (for example, if 2nd rinsing is selected, then 2nd rinsing water will be kept; if 1st
rinsing and 2nd
rinsing are selected at the same time, then 1st and 2nd rinsing water will be both kept).
During waiting minutes, drainage function could be activated if open and close cover once or press
start/pause key, buzz will prompt every 15 minutes within 4 hours, if no operation within 4 hours during
waiting, it will drain water directly after one buzz, and then turn to next process.