background image

8

1 Preparation before washing

Preparation before washing
1.Connect the water inlet hose. Open the 
   water faucet.
2.Confirm that the washing machine is earthed 
   reliably. Then insert the power plug into the 
   receptacle. The earth terminal shall not  link
   to gas  pipeline and faucet water pipeline.
3.Put down the drain hose.

Pay attention to followings before washing the laundries

Check  if 
the laundries
has special
requirement
on washing

Clear the
pocket. Take 
out the coins,
sand, hairpins
etc.

Tie the long
strips; fasten
the buttons;
close zippers.

When the pulsator
is  running  ,  the
buttons of   the
laundries may
cause noise. For
the sake of
discretion, please
put the laundries
with buttons  into
other laundries.

The quantity of 
the     laundries
shall not be too 
large.    Stretch
and  loosen the 
laundries before 
putting  them in
the tub.

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like
    mud or dust. For the parts with heavy soil, please apply detergent on 
    them in advance, which  can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn
    it over before putting in.
f.  Do not put those laundries polluted by chemicals into the washing
    machine directly.

4.slanting or uneven ground may result in 
   unstable working or abnormal noise. Please
   make the machine stand horizontally

Содержание HWM65-0566



















Отзывы: