background image

Push the  wash  button to 
set the wash procedure.

During commonl,woollen,
cotton,standard,jeans
 programs, push the  wash
 button to set different wash
time (6,9,12,15minutes)

During  the  other programs, 
push the  wash button the 
machine have no reaction.

The light is off

4 Close the top lid

10

30

40

20

6

12

15

9

1

3

OVERFLOW

2

1

5

7

3

Except water filling , draining, if the top cover is opened, 
the washing machine will stop running and alarm. 

  Description of the function of  buttons

Mode and meaning of the indicators

Flashing: indicate the running program or indicate the water leve 1,3,5,7,9l 

On: indicate the program about to run, or  indicate the selected mode or indicate the water level 2,4,6,8,10

Power On/Off  button

Push the  On/Off  button to switch on the power. 
When the power is on, push it again to switch off the power.
Push the  On/Off  button to switch on the power.
If the  start/pause  button is not pushed, the washing machine 
will automatically switch off the power after 5 minutes.

SOAK(MINUTES)

WA

SH(MINUTES)

RINSE(TIMES)

SPIN(MINUTES)

POWER

ON/OFF

SOAK

WA

SH

RINSE

SPIN

LOCK

Soak button

Push the  soak  button to set
 the soak procedure.During 
 common ,cotton,standard,
jean programs,  push the
soak button to set  different 
soak time(10, 20, 30,  40 
minutes).

Push the  soak  button to set
 the soak procedure.

During   quick ,   posthaste,
woollen  and  silk   programs,
push the  soak  button, the
machine have no reaction.

Wash button

Rinse button

Push  the  rinse  button to set th e rinse 
procedure and disinfect  function.
During  common woollen,cotton,tandard
and jeans programs, push the  rinse
button  to  set  different  rinse  times (  1, 
2, 3  times)
During  the other programs , the spin pro-
cedure  have no reaction.
Push the rinse  button more than  2S ,the
 light of overflow rinse  is light(except quick,
woollen,posthaste,tub dry)

Spin button

Push the  spin  button to set the 
spin procedure.
During  common,coollen,cotton,
Standard,jeans programs, push 
the  spin button to set different 
spin time (1,3,5,7  minutes)
During  the other programs, 
push the spin  button, the 
machine have no reaction.

5 Use the operation  buttons

Содержание HWM55-0528



















Отзывы: