background image

    Do not put  hand into the rotating tub.  It is 
dangerous even if the rotation speed is slow.
Take    special  care of   the children. Keep
children  away from the   washing    machine 
to avoid them climbing on it.

       Do not decompose, repair or alter
the machine by yourself.

        Do not  put  any hot or heavy items
(such as the kettle with hot water) on the 
washing machine.

         Do not wash laundries with volatile
materials (such as thinner, petrol etc.).

       Keep the machine away from direct
sunlight and heat source like the heater.

       The handicapped or children shall not
use the machine without care.

Safety precautions

Before using

Before using

Before using

Before using

Please check if the water faucet is open, and if
the connection of the water inlet pipe is proper.
It is suggested to use foamless washing powder.

To prevent the lint in the tub from blocking 
the cascade outlet and influencing the
cascade effect, please keep the lint filter 
in good condition, and install it to proper
position during washing. If the lint filter is
lost or damaged, please contact the local 
after-sale service department of our 
company.

 To protect your laundries and washing

machine, please take out all of the coins,
buttons, sand,  hairpin and other foreign
materials before washing.

Содержание HWM33-200





















Отзывы: