Haier HWM180-M1990DD, Руководство пользователя

Страница: 11 / 20

Connection between the water inlet hose
and the washer
1.Do not take off the water absorption cushion. Please check if
the cushion is dropped or damaged before each usage.
If it happens please contact our after-sale department
immediately.
2. Put the nut of the water inlet hose on the valve jointer.
3. Fasten the nut. Swing it gently to confirm if it
＇
s
suitable.
nut of the water inlet hose
jointer of the water inlet valve
water absorption cushion
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the
jointer.
2.Hang the lock lever to the jointer. Release the slider till a
click sound is heard.
Locking level
Slider
the jointer of the water
inlet hose
Check the connection between the jointer of the water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider.Then pull off the water inlet
hose.If the machine is used frequently, the jointer of the water inlet hose
can be kept on the faucet to prevent damaging the fixing screw.
Locking level
Slider