The display shows E9.
Communication failure
between display board and
power board.
The water tap leakage.
Is the water inlet hose loose? Fasten the inlet hose.
Please contact Customer
Care.
Troubleshooting
Common occurrence
17
Problem
Possible causes
What to do
Communication failure
between display board and
motor driver.
Indicates water has
reached a critical level.
The display shows F2.
The display shows FC.
Please contact Customer
Care.
Please contact Customer
Care.
The display shows E8.
Please contact Customer
Care.
Is the door lock broken?
- Stop spinning before complete the cycle. - Uneven load distribution
- Selected spin program, but it doesn't
works.
- Water in the drain hose when unpack.
- Residue from the performance inspection
that done by factory.
- The water will drain out first before
spinning cycle starts.
Cause
Problem
- Operation stops before completing wash
cycle.
- The appliance detected low water level,
will add water automatically to the ideal
level before resume the operation.
- Once the power supply back to normal/
power plug insert properly to the socket, the
machine will resume the washing cycle
without reset program.
- Washing machine resume its operating
after power supply back to normal.