Control Panel
14
Separate colour from white before loading machine.
During the Rinse cycle, only Spin time could be adjusted. The rest of the cycles will be locked.
After choosing the Tub Clean program, the rest of the cycles and settings are not functioning.
The machine runs the Tub clean program
An acoustic signal sounds will be the reminder to the user about the end of the washing
cycle and the washing machine will switch off automatically.
Fuzzy logic runs automatically for Cotton and Eco program. It helps to detect the laundry
type in the tub and set the suitable water level for the selected washing cycle.
The water level can be changed in the midst of the washing cycle. Press the Start/Pause
button then follow by the Water level button to reset the water level. Press the Start/Pause
button again to resume the washing cycle.
The delay function is an optional choice. Delay time is the time to the end of the program.
How to activate Delay function:
Firstly select the program required and press the Delay button.
The program indicator light will be off, follow by the Delay (Hours) indicator light up.
The delay time shows on the display is the time remaining till the washing cycle completed.
To cancel the delay function, please switch off the machine and switch on again.
Then make a new selection as desired.
You may choose to delay the washing completion time in
between 2 – 24 hours ( in 1 hour interval).
Delay function is not applicable to Tub Clean program.
function