Please install and adjust the machine according to the directions contained in this
manual.It is very important to follow these directions for the safe operation of the
machine,and to ensure your machine operates correctly.
Installation and adjustment
5
Back
Front
Screw
Bottom plate
Carpet
Do not install this machine on an incline surface greater than 2° . Installing machine on an
angle or on unstable ground will result in unstable running or stoppage of the
machine. Please adjust it by the following method:
1.
Confirm whether the machine is level.
2.Lift up the side of the leg slightly and twist the adjustable leg.
Balance washing machine
Install the bottom plate
The purpose of the bottom plate is to su
ppress noise
from the washing machine during operation.
Steps:
2. Place the plate onto the bottom of the
machine.
3. Use a screwdriver to tighten the screw ( in accessory
bag) securing the panel to bottom of the
washer.
4. Once the screw is tight and the panel is secure, place
the machine upright.
1. Lay down the washer on its back, on a nona brasive
surface.
Note: The distance between the washing machine
and the wall should be at least 70mm.
Change the direction of the drain hose
70mm
70mm
hose
of