Installation and adjustment
Usage of the drain hose
Inlet hose connection
1.The height of the drain hose shall be less
than 10cm, otherwise the drainage will not
be smooth,and the machine will take a long
time to stop in the middle.
2.Do not trample or press the drain hose.
3.If the drain hose is too long, cut it at mid
point. To make smooth drainage,cut the
front end of the hose slantingly.
4.If extra drain hose is needed, please
make separate purchase.The inner
diameter of the extra hose shall not
less than 30mm,and the length shall
not exceed 1.5m.
5.If the extra hose is too long, cut it either
at A or at B point.
Note:
Connect the main hose with the detachable water hose according to the
instructions,use the hose that comes with the machine,do not reuse the
old hose.
A
B
The new hose-sets supplied with the appliance are to be used and that old hose-sets
should not be reused.
Confirm the water faucet
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please replace ment it
to avoid leakage.
The exit end face of the faucet
water faucet,suitable
water faucet, not suitable
6
The drainage shall be smooth with the drain hose.