background image

6

Preparation before washing
1.Connect the water inlet hose.
2.Confirm that  the washing machine is earthed
  reliably .  Then  insert  the power plug into the
  receptacle. Do not connect the earth  terminal
  to  the gas pipe and  tap water pipe.
3.Put down  the drain hose .

4.Slanting  or  uneven  ground  may  result  in 
  unstable working or abnormal noise. Please
  make the machine stand horizontally.

Preparation before washing

Pay attention to followings before washing the laundries

Check   if 
the laundries
has special
requirement
on washing

Clear the 
pocket. Take 
out the coins,
sand, hairpins
etc.

Tie the long
strips; fasten
the buttons;
close zippers.

When the pulsator
is  running  ,   the 
buttons   of    the 
laundries may
cause noise. For
the sake of
discretion, please
put the laundries
with buttons into
other laundries.

The quantity of 
the laundries
shall not be too
large.    Stretch
and  loosen the 
laundries before
putting  them in
the tub.

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like 
    mud or dust. For the parts with heavy soil, please apply detergent on 
    them in advance, which  can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn 
    it over before putting in.
f.  Do not put those laundries polluted by chemicals into the washing
    machine directly.

Содержание HWM100-0626S



















Отзывы: