English
16) Time Display Zone
• Time display zone will show time as following: If time is less than 1 hour, display as 0:XX
(such as 0:45), more than 1 hour but less than 9 hours display as X: YY (such as 3:28),
more than 10 hours, display as XX: YY (such as 13:20).
17) Door Lock LED
• If the door lock is secured the door lock LED will be on. If door lock is not locked, and the
door can open, door lock LED is off. To add a garment touch the Start / Pause pad (3). The
door lock icon will be Off. Once the garment is added, close the door and touch the Start
/ Pause pad again. The washer will resume its operations.
WAShER OPERATING PROCEDURE
1. Lightly touch the On/Off pad to power on the washer.
2. Select wash cycle by touching the pad by the cycle. A light will illuminate the cycle
chosen.
3. Once selection is made, the soil level, rinse level, spin speed and the wash/rinse water
temperatures are pre-set. At this point, if you choose not to have any other options, lightly
touch the start/pause pad to start the wash cycle.
If you want to change the preset settings before you touch the Start / Pause pad.
1. Lightly touch the soil level, rinse level, spin speed and water temperature to select.
2. Any of the supplied options: Delay Start, Prewash, Beeper setting, Extended Spin, Stain
treatment, Rinse & Spin or Custom Program can be now chosen.
3. After option selection, lightly touch the start/pause pad to start the wash cycle. (All
options not available in all cycles).
4. To customize your settings, once your favorite settings are selected touch the Custom
Program pad and hold for 3 seconds.
5. To child lock the control panel touch the Rinse&/Spin pad and hold for 3 seconds. To
unlock the child lock function only touch the Rinse&/Spin pad. Power off pad cannot
unlock the child lock function. During activation of the child lock function, the child lock
LED is on.
6. You could pause the washer and if the door lock light on the control panel will be Off
during this time the door of the washer can be opened to
Add a Garment.
7. With the machine in standby, you can chose a delay start time from 1-24 hours. To
do so, touch the delay pad. Each touch of this pad advances the delay in 30 minutes
increments. To set the delay function touch the Start / Pause (3) pad. Doing so will cause
the delay (12) pad to flash. When set at 24:00, push the delay pad again and the delay
time is cancelled. After setting wash program is change, delay time is cancelled. Program
changes, delay time is also cancelled.
FEATURES
Electronic Touch Pad Controls:
Allows you to use the washer at the touch of your fingertips.
5 Compartment Dispenser:
Use liquid or powdered detergent for prewash, powdered
detergent for main wash, liquid detergent for main wash, liquid bleach and liquid fabric
softener for optimum wash.
Designed specially to use only HE (
high Efficiency
) detergent
Energy Star
unit saves you water and energy
Sanitary Cycle:
An additional internal water heater automatically heats the water to ideal
levels to clean those hard to remove stains.
14
