10
11
Control panel-function but tons
To get best results in each programme Haier has well defined specific default
settings. If there is no special requirement default settings are recommended.
According
to these factory settings many programme parameters and
additional functions could be individually changed.
a
b
c
d
“Temp” (button c)
Touch it to change the washing temperature of the
programme. If there is no value the water is not heated.
Touch it to rinse the laundry more intense with fresh
water. This is recommended for people with sensitive
skin. Zreo to three additional rinse cycles are available.
“ Extra Rinse” (but ton e)
e
Display symbols
Control panel-
“Child Lock” (button a+b)
The “Child Lock” function stops any further changes
to the set program. To active, hold the “Delay” and
“Speed Up” buttons at the same time for 3 seconds.
Panel elements will be blocked after hearing an
indicating voice. To deactivate the “Child Lock” hold
the “Delay” and “Speed Up” buttons at the same time
for 3 seconds.
Display
The display shows following information:
1. Washing time
2. End time del ay
3. Error codes and service information
Symbols of the displ ay:
Running spin/
drainage cycle
Running Rinse
cycle
Time display
Running Washing
cycle
Running weighing
cycle
f
g
“Water Level” (button f)
Touch it to select a proper level of water. When select-
ing from L1 to L3, the water level increase gradually.
“
” (button g)
Touch it to
start or interrupt the currently
displayed programme.
Remaining opera-
tion time
Remaining dealy
time
“Delay”-Start time delay (Button a)
Touch it to increase programme end time in increments
of 30 minutes at most
24hr. Press the Start/Pause
button once you are satisfied with the delayed end time.
You will note the countdown of the delay time com-
mence and subsequently the remaining programme
cycle time will be displayed. The related symbol to the
operation will display.
“Speed Up” (button b)
Touch it to reduce washing time.
General information and tips:
End time must always be longer than programme cycle time. Otherwise
operation will start immediately, and the end time chosen will be never reached.
“Spin Speed” (button d)
Touch it to change or deselect the spin of the program-
me. If there is no value, the laundry will not spin.
Start/Pause