Haier HWF10DW1 Скачать руководство пользователя страница 3

4

5

Safety

Safety

Do not …

During daily use of the appliance...

Do not ...

Before switching on the appliance for the 
first time...

...make sure all transport bolts are removed.
...make sure the power cord is not caught under or in
   the appliance and there is no damage or risk  for
   damaging.       
...make sure the power circuit fuse is rated for 10A.
...use a sepa rate earthed socket for the power supply.
...make sure the plug is al ways accessible.
...hold the plug and not the electric cable when 
   unplugging the p ower supply.
...check that hose joints and  connections are firm and
   by opening tap check  for any water leaks.
...do not switch on the appliance until everything is 
   properly installed!

...all ow children or infirm persons  to play with the 
   appliance or packing materials.
...install the applian ce outdoors in a damp pla ce, or in  
   an area which may be prone to water leaks such as 
   under or near a sink unit. In the  event of a water leak 
   cut power supply and all ow the machine to dry 
   naturally.
...expose machine to any frost, heat or direct sunlight.
...touch or use the appliance when barefoot or with 
   wet or damp hands or feet.
...use flammable de tergent or dry cleaning agent.
...use any flammable sprays in close vicinity  to the  
   appliance.
...remove or insert the plug in p resence of flammable 
   gas.
...pla ce the appliance directly on a carpet, or close  to
   a wall or furnitu re.

...supervise children.
  Ensure that they don’t play with the applicance and 
  its packaging.

...ensure that appliance is not used by people with
   reduced physical, sensory or mental capabilities, or lack 
   of experience and knowledge.
...pull up zips, fix loose th reads and take care for small  
   items to prevent laundry from being entangled. If 
   necessary, use an appropriate bag or net.
...switch off at the wall socket after each wash 
   programme to save electricity and  for safety.
...keep the lower part of the porthole clean and open 
   door and detergent drawer if applian ce is not in use 
   to prevent odours.
...a damaged power cord is only to be replaced by the
   manufacturer, service agent or other specifically
   qualified peopl e.

... touch the door during the  washing process, as it may   
   get hot.
...pla ce heavy objects or sources of heat or damp on top 
   of the applian ce.
...hot wash from rubber or sponge-like materials.
...open detergent drawer during any wash cycle.
...force the door to open, it is fitted with a self-lock
   device and will open shortly after wash cycle end.
...open the door if the  water level is visible  over the
   porthole.
...cover or encase the applian ceduring operation or after
   wards as it will  restrict any moisture or dampness to
   evaporate .

This appliance is in tended to be used in household and similar applications such
 as:

...  staff ki tchen areas in shops, offices and other  working environments;
...  farm houses;
...  by clients in ho tels, mo tels and other  residential type e nvironments;
... bed and breakfast type environments;
... a reas for communal use in blocks of flats or in launde rettes;

The appliance is not to be used by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or in struction concerning use of the 
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the 
appliance.

...connect water inlet valve to the hot water supply.

...Use the hose-set supplied with the appliance. Old 

hose-sets should not be  reused.

... max. capacity 10 kg,water pressure 0.03-1MPa.

Содержание HWF10DW1














Отзывы: