Haier HWD80-B14979, Руководство пользователя

Страница: 29 / 111

EN
10-Installation
29
10.5 Aligning the appliance
Adjust all feet (Fig. 10-7) to achieve a complete level
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
be as stable and fl at as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lock ut (1) against the housing.
10.4 Moving the appliance
If the machine is to be moved to a distant location, re-
place the transportation bolts removed before instal-
lation to prevent damage:
2. Remove the 10 screws (R1 - R10) from lower
back reinforcement. take out reinforcements (S1
and S2) from the machine.
3. Pull out the 2 iron bars I1 and I2 (Fig. 10-5)
4. Fill the 6 left holes with blanking plugs (Fig. 10-6).
Note: Keep in safe place
Keep the transportation bolts in a safe place for later use. Whenever the appliance is to
be moved at fi rst reinstall the bolts.
S2
R1-R 4
S1
R5-R10
I1
I2
10-7
10-4
10-6
10-5
*Only HWD 100/120-B...
*Only HWD 100/120-B...