EN
9-Troubleshooting
23
9.2 Troubleshooting with display code
Problem
Cause
Solution
•
Drainage error, water is not fully drained
within 6 minutes.
• Clean pump fi lter.
•
Check drain hose installation.
• Lock error
•
Shut the door properly.
•
Water level not reached after 8 minutes.
•
Drain hose is self-syphoning.
•
Make sure that tap is fully opened and
water pressure is normal.
•
Check drain hose installation.
•
Water protective level error.
• Contact the After sales service.
•
Drying temperature is too high
•
When temperature exceeds 80°C the drying
alarm, when less than 80°C the automatic lift-
ing of the alarm.
Many occuring problems could be solved by yourself without specifi c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶
Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages..
▶
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualifi ed persons in order to avoid a hazard.
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code
Message
:
The remaining wash cycle time will be 1 hour and 25 minutes
:
The remaining wash cycle time including chosen end-time delay will be 6 hours and
30 minutes
Automatic dry.
The washing cycle is fi nished. The appliance shuts off automatically.
The function child lock is activated.
Door is closed because of high water level, high water temperature or spinning cycle.
The buzzer is deactivated
The buzzer is activated
Содержание HWD80-B14939S8
Страница 33: ......
Страница 34: ...HWD80 B14939S8 HWD90 B14939S8 HWD100 B14939S8 HWD80 B14939 HWD90 B14939 HWD100 B14939 ...
