Haier HWD1050AN1, Руководство пользователя

Страница: 11 / 36

11
3.5.1-Function button “ Smart Dose“
Note: Factory settings
settings. If there is no special requirement, default settings are recommended.
3.4 Detergent drawer
Open dispenser drawer, the following components can
be seen (Fig. 3-5):
1: compartment for powder detergent.
2:compartment for liquid detergent.
This compartment is intended for liquid detergent to be used
with the Smart-dose function. Reservoir capacity is 750ml.
3: compartment for softener.
4: lock tab, press it down to pull out dispenser drawer.
The recommendation on the type of the detergents
is suitable for the various washing temperatures.
Please refer to the manual of detergent.
3-5
3-7
3.5 Function buttons
The related indicators are displayed.
all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
By pressing the buttons, the function is selected.
3-6
Wool
3.5.4
3.5.1
3.5.7 3.5.6
3.5.2
3.5.5
1
2 3
4
Options
Spin Speed
Dry Level Temp.
Dry On/Off Smart Dose
UV Sanitise
3.5.3
Smart Dose
Touch this button (Fig. 3-7) gently to select the Smart dose function
for liquid detergent, panel display . If the liquid detergent is not
enough to complete the cycle, will flash every second.
To set up level detergent:
The Smart Dose function dispenses the right amount of detergent for the clothes
according to the weigh and load type. The default setting is”D-3”, which is the average
amount of detergent needed to launder a medium soiled load. There are 3 additional
levels that allow to change the way the washer calculates the volume of liquid detergent;
this enables a personalized experience according to the laundry needs. For lightly soiled
clothes, use level “D-1” or level ”D-2” and for heavily soiled clothes we recommend setting
the washer to level ”D-4”. Similarly, for sensitive skin, we recommend using the lower
setting “D-1”, to minimize possible residual detergent in the clothes.
To change the Smart Dose setting: Press the “Smart Dose” button for 3s to enter the
program setting mode. The program indicator light will turn on and the default position
“D-3” will be displayed. Rotate the knob to switch between levels and select the desired
setting. Press the “Smart Dose” button again to save the selection and exit the mode.
Note: Liquid dete r gent
If using liquid detergent, it is not recommended to adding more than 750ml.
The function buttons(Fig. 3-6) enable additional options
in the selected programme before the programme starts
.
By switching off the appliance or setting up a new programme,
NZ AU