Haier HWD100-FD756DD, Руководство пользователя

Страница: 31 / 36

9-Installation
GB
31
Following connections are possible:
9.5.1 Drain hose to sink
Hang the drain hose with the U-support over the
edge of a sink with adequate size (Fig. 9.5-1).
ping.
9.5.2 Drain hose to waste water connection
T
●
he internal diameter of the stand pipe with
vent-hole must be minimum 40 mm.
Put the drain hose for approx. 80 mm in the
wastewater pipe.
(Fig. 9.5-2).
CAUTION!
The drain hose sho
●
uld not be submerged in water and should be secu ly xed and
leak-f ree. If the drain hose is placed on the ground or if the pipe is at a height of less
than 80 cm, the washing machine will continuously drain while being l
●
led (self-si-
phoning).
Drain hose is no
●
t to be extended. If necessary contact after sales service.
9.5.3 Drain hose to sink connection
The junction must lie above the siphon
A spigot connection is usually closed by a pad (A).
That must be removed to prevent any disfunc-
tion (Fig. 9.5-3).
Secure the drain hose with a clamp.