Haier HWD100-FD756DD, Руководство пользователя

Страница: 19 / 36

5-Daily use
GB
19
5.11 Interrupt - can
●
cel wash programme
To interrupt a running programme press gently “Start/Pause“. The LED in the button is
ashing. Press it again to resume operation.
To cancel a running pr
●
ogramme and all its individual settings
1. Press “Start/Paus
●
e” button to interrupt the running programme.
3. Pr
●
ess ”Power“ button to switch the appliance on again.
4. Run programme SPIN and select “no Speed” ( no value is displayed ) to drain the water.
5. Select a new programme and start it.
Note: Standby mode / energy-saving mode
The switched on appliance will go into standby-mode if it will not be activated within 2
This saves energy. To interrupt the standby mode push “ Start/Pause“ button.
5.10 Start wash programme
Press “Start/Pause“ button (Fig. 5-10) to start. Appli-
ance operates according to present settings. Changes
are only possible by cancelling the programme.
5.9 Add individual selections
Select required options and settings (Fig. 5.9); refer to
CONTROL PANEL.
Note: Odour removal
5.7 Switch on the appliance
Press the ”Power“ button to switch on the appliance
(Fig. 5.7)
. The display is shining.
5.8 Select a programme
To get the best washing results, select a programme
Turn the programme knob (Fig. 5.8) to select the right
programme. Relat ed programme LED lights up and
the default settings are displayed.
Before first use we recommended to run programme Drum Clean with no load,without
“Smart Dosing”function and add a small amount of detergent in washing agent comp-
arment(2)or special machine cleaner to remove possibly corruptiveresidues.