Haier HWD100-BP14636N, Руководство пользователя

Страница: 30 / 106

10- Installation
EN
30
Following connections are possible:
10.6.1 Drain hose to sink
Hang the drain hose with the U-support over the
edge of a sink with adequate size (Fig. 10-6.1).
-
ping.
10.6.2 Drain hose to waste water connection
The internal diameter of the stand pipe with
vent-hole must be minimum 40 mm.
Put the drain hose for approx. 80 mm in the
wastewater pipe.
(Fig. 10-6.2).
CAUTION!
●
leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less
●
-
phoning).
Drain hose is not to be extended. If necessary contact after sales service.
10.6.3 Drain hose to sink connection
The junction must lie above the siphon.
That must be removed to prevent any disfunc-
tion (Fig. 10-6.3).
Secure the drain hose with a clamp.
10.7 Fresh Water Connection
●
Make sure that the gaskets are inserted.
●
1.
●
Connect the water inlet hose with the angled end
to the appliance (Fig. 10-7.1). Tighten the screw
joint by hand.
2. The other end connect to a water tap with a 3/4“
thread (Fig. 10-7.2).
10-7.2
10-7.1
10-6.2
10-6.1
10-6.3