Haier HWD-D1000TXVEME, Руководство по обслуживанию

Страница: 23 / 30

SERVICE MANUL
HWD-D1200TXVE-S
Washing Machine
Failure information: drying waterlevel sensor abnormity
Er12
Er13
Er10
E rror message:
The water level sensor circuit short cut or open
Troubleshooting:
N
Y
Connect well
Check if the wire of water levle sensor
is connected properly
it
N
Y
Check if the water levle sensor
is damaged
R eplace it
R eplace P CB
N
Check if water switch hose and air collector
are jammed
Clean water switch hose and air
collector
N
Pull out water switch inserts and turn on
power, then set wash mode. While water
is entering at the position of 1/4 g lass
window, check the resistance between
and , is it 0? Ch eck the resistance
between and , is it infinite?
Replace water pressure switch
Y
Y
R eplace P CB
value washing machine will not spin and run in a low speed to avoid abnormal vibration and noise.
1.
2. Lower the wet weight of laundry pieces by wringing manually and placing them back in the drum in symmetrical position.
3Take out and replace the laundry pieces into the drum in a more balanced position on the inner wall of the drum.
4. Add 1 or 2 pieces of laundry into the drum to lower the unbalance.
5.
6. In case the failure persist please send a technician to check it in home.
Failure information:drying heater abnormity
Troubleshooting:
N
drying heating is short cut or open
Replace the drying heating
Replace PCB
Connect it well
Y
Check if the wire of drying
heating is connected properly
N
Y