Haier HWD-D1000TXVEME, Руководство по обслуживанию

Страница: 22 / 30

Error message. Water level exceeds protective value.
Troubleshooting:
N
Check if water switch hose and air collector
are jammed
Clean water switch hose and air
collector
N
Pull out water switch inserts and turn on
power, then set wash mode. While water
is entering at the position of 1/4 glass
window, check the resistance between
ķ
and ĸ , is it 0? Check the resistance
between ķ and Ĺ , is it infinite?
Replace water pressure switch
Y
Y
Without starting but electrifying, measure the
import voltage of inlet valve, is it between
AC 220-240V?
Replace
PCB
Y
N
Replace inlet valve Without power ,connect inlet pipe to inlet
vavle,then open the tap and observe if water
is entering in dispenser
Y
Troubleshooting:
Replace it
N
Y
N
Connect well
Y
Replace display board
Check if the dry temperature sensor
is connected properly
it
Check if the dry temperature sensor
is short cut or open
Error message:
The dry temperature sensor short cut or open.
SERVICE MANUL
HWD-D1200TXVE-S
Washing Machine