Haier HW90-BP14636, Руководство пользователя, Страница: 25 / 100

GB
10-Installation
25
10.1 Preparation
Take the appliance out of the packaging.
Remove all packaging material including polystyrene base, keep them out of childrens
reach. While opening the package, water drops may be seen on plastic bag and port
hole. This normal phenomenon results from water tests in the factory.
10.3 Dismantle the t
●
ransportation bolts
The transportation bolts are designed for clamping
anti-vibration components inside the appliance during
transportation to prevent inner damage.
1.
Remove the back cover (Fig. 10-3).
2. Remove all 4
●
bolts on the rear side and take out
plastic spacers (A) from inner side of the machine
(Fig. 10-4).
10-4 10-3
Note: Packaging disposal
Keep all packaging materials out of children´s reach and dispose them in an environmen
tally friendly manner.
10.2. OPTIONAL: Adjusting the bottom cover
board
um-plastic board (A) (Fig. 10-1). The board is used for
reducing noise after covering the bottom of the cabi
net.
2. Lay the washing machine down to its side, port
hole pointing upwards, bottom side towards op
3. Place the calcium-plastic board.
Screw the bolts through the four holes on the
upright again.
There is also a felt (B) in the package.
1. Past the felt on one side of the calcium-plastic
board (Fig. 10-1).
The felt is pointing inside the appliance.
10-1
1.
2.
3.
10-2