Haier HW90-BP14636, Руководство пользователя, Страница: 23 / 100

9-Troubleshooting
23
Cause
Temperature sensor - error.. Contact the After sales service..
Heating error Contact the After sales service..
Motor - error.. Contact the After sales service..
W
●
ater level sensor - error Contact the After sales service..
or
Abnormal communication error Contact the After sales service..
Check and balance laundry load in the drum.
Reduce the load.
Cause
Washing machine fails
to operate. Programme is not yet started. Check programme and start it.
Door is not properly closed. Close the door properly.
Machine has not been switched on. Switch the machine on.
Power failure. Check power supply.
Child lock is activated. Deactivate child lock.
Washing machine
●
water.
No water. Check water tap.
Inlet hose is kinked. Check inlet hose.
Water pressure is less than 0.03 MPa. Check water pressure.
Door is not properly closed. Close the door properly.
Water supply failure. Ensure the water supply.
Machine is draining Height of drain hose is below 80 cm. Make sure that drain hose is
properly installed.
Dr
●
ain hose end could reach into
water.
●
Make sure the drain hose is not
in water.
Drainage failure. Drain hose is blocked.
Drain hose end is higher than 100 cm Make sure that drain hose is
properly installed.
Strong vibration while
spinning. Not all transportation bolts have
been removed.
●
Remove all transportation bolts.
Appliance has no solid position. Ensure solid ground and a levelled
position.
Machine load is not correct. Check load weight and balance.
Operation stops
before completing
wash cycle. Water or electric failure. Check power and water supply.
Operation stops for
a period of time. Appliance displays error code. Consider display codes.
Problem due to load pattern. Reduce or adjust load.
Programme performs soaking cycle. Cancel programme and restart.