Daily use
a
a
16
Interrupt - cancel wash programme
To
T
T interrupt a
t running prog
rr ramme press gently “Start/
Pause“.
Programme run-time is flashing. Pr
. ess it again to resume
operation.
To
T
T cancel a running programme and all its individual set-
tings activate “Start/Pause“ and then fo
ff r about 3 seconds
“On/Offff“
ff .
After washing
At programme cycle end
“
End“ is display
aa ed, afterwar
,
ds
machine will shut off automatically.
yy
Remove laundry as soon as possible to go easy on it and
to prevent more wrinkling.
Turn off the water supply and unplug the pow
T
T
er cord.
Open the door to prevent formation of moisture and
odours. Let it open while not used.
.
Standby-mode
b
b
The switched on washing machine will go into standby-
mode if it will not be activated within 2 minutes before
starting the program or at the end of program.To
T
T inter-
rr
rupt the standby-mode push one ke
kk y.
yy During standby-
.
mode the Start/Pause button shine all the time.
Environmentally responsible use
▶
To
T
T achieve best use of energy,
yy water
,
,rr detergent and time you should use the
recommended maximum load size
▶
Do not overload (hand width clearance above laundry).
▶
Apply exact dosages of each washing agent.
▶
Choose the lowest adequate washing temperature - modern detergents are
efficiently cleaning below 60°C
.
▶
Raise default settings only due to heavy staining.
aa
▶
Select max. spinning speed if a domestic dr
.
yer is used.
Activate or deactivate the buzzer
1. Switch on the appliance.
2. Select the “Spin/drain“ programme.
3. Press the “function” and “selection” button (also as
“speed up”) at the same timefor 3 seconds.“BEEP
OFF” will be dis
-
play
aa ed and the buzzer will be deactivated.
For activating the buzzer please press these two buttons
at the same time again. “BEEP ON” will be display
aa ed.
Function
Selection
Delay
