Haier HW80-B14266, Руководство пользователя, Страница: 10 / 100

Choose the best Detergent
Detergent
L
0 6 - d l o c d i u q i L
40 - 90
---
---
P Powder
o Optional
No -
Temperatur range in °C
If using liquid detergent, it is not recommended to activate the delayed start. The amount of
detergent necessarily choose to package information!
info: Modern washing detergents at low temperatures.
Universal
Cotton
Mix
Wool
Delicate
Express 15’
Synthetic
Softener
Special
Delicate
Color
- - -
-
-
-
- -
-
-
-
- -
L
L
L
L L
O
O
O
O
O
O
L/P
L/P
L/P L/P
L/P
L/P
Display code
n o i t u l o S e s u a C e d o C
Auto
Lo
/HALF
/FULL
/HI
Automatic
Weighing the laundry load in
the drum.
load detection. Laundry weight detection in progress, please
wait until program cycle time is displayed.
Please wait until program cycle time is
displayed: Lo = small load;HALF = half load;
FULL = optimized weight load;
HI = full load.
1:25 Remaining wash cycle time. Refer to additional symbol.
19:30 Remaining wash cycle time. End is likely delayed - refer to symbol.
Lock
Door cannot be opened due to
water level or hot water in the
drum. Wait to the end of program or cancel the
program and select the drain program. In
case of hot water is in the drum, to avoid
scalding, select a handwash program and
wash several minutes and then select a
draining program before open the door.
End End of cycle.
E1 Drainage error, water not emptied. Clean pump filter.
Check drain hose for blockage and proper
installation.
E2 Lock - error. Shut the door properly.
E4 Water level not reached after 8
minutes.
Check if water supply and water pressure
is normal.
Drain hose is self-syphoning.
E8 Water protective level - error. Auto release.Otherwise contact the
After sales service.
F3 Temperature sensor - error. Contact the After sales service.
F4 Heating error (Appears at the end of
a cycle . )
Contact the After sales service.
F7 Motor - error. Contact theAfter sales service.
Fb Water overflow. Close tap immediately.
Contact the After sales service.
FA Water level sensor error. Contact theAfter sales service.
FC Electronic control - error. Contact theAfter sales service.
Unb Unbalanced load and not able to
spin. Check and balance the laundry load in the
drum. Also reduce the load if too heavy.
Restart with a spin program.
Warning!
Code Fb : Water-overflow protection is placed on deepest part of appliance. In case of leacka-
ge all functions will be shut down automatically except drain pump which will be activated for
safety reasons.