Haier HW70-IM12929, Руководство пользователя, Страница: 26 / 32

8. Troubleshooting
8.2 Troubleshooting with display code
Problem Cause Solution
•
Drainage error, water is not fully
drained within 6 minutes.
•
•
• Lock error. •
Shut the door properly.
•
Water level not reached after 30
minutes, at the latest.
•
Drain hose is self-syphoning.
•
Make sure that tap is fully opened
and water pressure is normal.
Clean pump filter.
•
Check drain hose installation.
Check drain hose installation.
•
Water protective level error.
•
•
Temperature sensor error.
•
•
Heating error.
•
Contact the service agent
Contact the service agent
Contact the service agent
Many occuring problems could be solved by yourself without specific expertise. In
case of a problem please check all shown possibilities and follow below instructions
before you contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Electrical equipment should be serviced only by qualified electrical experts,
8.1 Information codes
Following codes are displayed only for information referring to the washing cycle.
No measures must be performed.
from the mains socket.
because improper repairs can cause considerable consequential damages.
Code Message
The remaining wash cycle time will be 1 hour and 25minutes.
The washing cycle is finished. The appliance shuts off automatically.
Function child lock is activated.
Door is closed because of high water level, high water temperature or
The buzzer is deactivated.
The buzzer is activated.
The remaining wash cycle time including chosen end-time delay will 6 hours
and 30 minutes.
spinning cycle.
24