Haier HW70-IM12929, Руководство пользователя, Страница: 12 / 32

10
2.10 Electrical Connection
Before each connection check if:
power supply, socket and fusing are appropriate to
the nameplate.
the power socket is earthed and no multi-plug or
extension board are used.
the power plug and socket are strictly according.
Put the plug into the socket (Fig. 2-10).
2-10
WARNING!
Ensure always that all connections (power supply, drain and fresh water hose)
Take care these parts are never to be crushed, kinked, or twisted.
If the supply cord is damaged, it must be replaced by the service agent (see
Note: Hygiene
After each installation or long periods of disuse, before first use and for regular
2.9 Fresh Water Connection
2-9.2 2-9.1
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled end
to the appliance (Fig. 2-9.1). Tighten the joint
2. The other end connect to a water tap.
(Fig. 2-9.2).
warranty card) in order to avoid a hazard.
are firm, dry and leak free.
2. Before Use
by hand.
maintenance run the “Self Clean” programme with no load and small amount of
detergent in “detergent drawer” compartment (2) or with special machine cleaner to
remove possibly residues.