8
Control panel -
function buttons
“Function“ (button a)
Touch it to select sequentially required functions and set-
tings. The related function name and setting will shine.
-
“Speed up“
: Saves time and energy. Preferable if laundry
is slightly soiled.
-
“Intense“
: Intensifies cleaning results. Preferable if laundry
is heavily soiled.
-
“Soak“
: Laundry will remain in last rinse cycle water.
-
“Signal“
: Activates the signal tone mode .
-
“Rinse+“
: Adds 1-3 rinse cycles. Preferable to better flush
out possible residues
“Selection“ (button b)
Touch it to confirm
the current
shining “Function“, its sym-
bol is blinking. Additionally a “checkmark“, or a “1“/“2“/“3“
will light up. Function will be activated after 3 seconds or
if “Function“(button a) is touched, all related symbols are
shining.
“Child lock“ - control panel lock function
(button a + b)
This option blocks all panel elements against activation. After
starting, press simultaneously “Fu“Selection“ for about
3 seconds. Panel lock symbol is now displayed. Next repetition
deblocks any function.
“Temperature“ (button c)
Touch it to adapt maximum of water temperature.
Note: Display
of “
“
stands for
“
no operational
heating“.
“Spin Speed” (button d)
Touch it to adapt speed of centrifugation.
Note: Display of
“
“
stands for
“no operational spinning“.
.
To get best results in each programme Haier has well defined
specific default settings.
If there is no special requirement default settings are recommended. Accordingly to
these factory settings many programme parameters and additional functions could be
individually changed (see “programmes“ and “function“ buttons).
9
function buttons -
Control panel
“Memo” (button e)
Touch it for 2 seconds to memorize all currently displayed
settings as to-be default settings. Two signal tones confirm
that change. When programme is started or chosen next
these settings are activated.
“Delay“ – Start time delay (button f)
Touch it to increase programme start time in steps of 30
minutes from 0,5-24h. Related symbol and current start time
will light up. During operation at first countd own of delay
time and subsequently remaining programme cycle time will
be displayed. Related symbol will shine.
General information and tips:
To cancel any actual setting change programme or press
”On/Off ” about 3 seconds. To cancel a running program
-
me touch “Start/Pause“ and then ”On/Off ” for about 3
seconds.
Door is locked
Running wash
No operational
(in operation)
cycle
heating
Control panel locked
Running rinse
No spin cycle
cycle
No water supply
Running spin/
Memo
drainage cycle
Door is open
Time display
Delay
(1 or 2)
Remaining operation time (1)
Remaining delay time (2)
Rinse
Anti crease
Speed up
Intense
Soak
Temp.
M emo
Function Selection
Spin Speed
Delay
a
b
Rinse
Anti crease
Speed up
Intense
Soak
Temp.
M emo
Function Selection
Spin Speed
Delay
c
d
Rinse
Anti crease
Speed up
Intense
Soak
Temp.
M emo
Function Selection
Spin Speed
Delay
e
f
Display symbols
Basic status indication Programme cycle Programme settings
indication
“