25
Technical data
24
Installation
3. Drain hose to sewage pipe
Use the drain hose bracket to keep drain hose end retained.
Fix the bracket sufficiently to avoid dropping down due to
operational movements.
Warning!
The drain hose should not be submerged in water and should be
securely fixed and leak-free. If the drain hose is placed on the
ground or if the pipe is at a height of less than 80cm, the washing
machine will continuously drain while being filled (self-siphoning).
Drain hose is not to be extended. If necessary contact after sales
service.
Power supply connection
Before each connection check if:
- socket is adequate for the maximum power of the
appliance (safety power circuit fuse should be
rated not less than 15A).
- voltage should meet the requirement.
- power outlet should be appropriate to appliance plug.
- used power socket has to be earthed.
Note - only UK: The fuse in a UK 13A plug must comply
to BS1362 standard.
Basic technical information regarding the appliance
Power source
220 - 240V~/50Hz
Max. working current (A)
10
Water pressure (MPa)
0.03
≤
P
≤
1
Nominal load (kg)
7
Spinning speed (rpm)
1400
Washing programmes
16
Max. power (W)
2000
Dimensions (HxDxW mm)
840 x 600 x 595
Net. weight (kg)
67
Power consumption of the off-mode (W)
0,2
Power consumption of the left-on mode (W)
0,2
HW70-B14266