Haier HW60-10266A, Руководство по обслуживанию

Страница: 16 / 25

SERVICE MANUL
HW60-12266AS
Haier Front Load Washing Machine
16
Error message. Motor speed is abnormal.
Troubleshooting:
Y
Cut off power and check if motor wires
are connected well
Reconnect well
Y
N
The motor is broken, replace it.
N
Switch on the power and check the
voltage(5-8 or 5-9 of motor connector) is
between 220-240V?
Replace the PCB
Error message. Water level exceeds protection value.
TroubTroubleshooting: leshooting: Troubleshooting:
N
Check if the
pipe connected to the
water level sensor is folded.
Unfold the
pipe connected
to the water level sensor
N
Check if the
pipe connected to the
water level sensor is jammed.
Clean the pipe connected
to the water level sensor
Y
Y
Without starting but electrifying, measure
the import voltage of inlet valve, is it
between AC 220-240V?
Replace PCB
Y
N
Without power ,connect inlet pipe to inlet
valve, then open the tap and observe if
water is entering in dispenser
Y
Replace inlet valve