Haier HW100-BP14959S6, Руководство пользователя

Страница: 17 / 32

se
5-Daily use
Note: Door lock
For safety reasons the door is locked partially during the washing cycle. It is only
Note: Standby mode / energy - saving mode
The switched on appliance will go into standby mode if it will not be activated within 2
5.10 Start wash programme
5.11 Interrupt / cancel wash programme
5.12 After washing
Press “Start / Pause” button (Fig. 5-8) to start. Appliance
operates according to present settings. Changes are only
possible by cancelling the programme.
5-8
5.13 Act
minutes before starting the programme or at the end of programme. The display swit-
ivate or deactivate the buzzer
The acoustic signal can be deselected if necessary:
1. Switch on the appliance.
2. Select the Drum Clean programme.
3. Press the “Extra rinse” button “Temp.” button and “Steam” button at the same time
for about 3 seconds. “ ” will be displayed and the buzzer will be deactivated.
For activating the buzzer press these three buttons at the same time again, then
“ ” will be displayed.
ches off.
2. The appliance switches off automatically.
3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.
4. Turn off the water supply.
5. Unplug the power cord.
6. Open the door to prevent formation of moisture and odours. Keep open while not used.
1. At programme cycle end is displayed.
16
2. Turn the knob to select a new programme and start it.
possible to open the door at the end of the programme or after the programme
was cancelled correctly (see description above).
In case of high water level, high water temperature and during spinning it is not
possible to open the door; is displayed.
To interrupt a running programme press gently “ Start / Pause”. The LED in the button
is flashing. Press it again to resume operation.
To cancel a running programme and all its individual settings:
1. Press “Start / Pause” button to interrupt the running programme.