Haier HW100-BDV14979S8U1, Руководство пользователя, Страница: 27 / 40

Problem
●
Cause Solution
Motor error.
Abnormal communication error.
Contact the Af ter sales service.
Unbalanced load error. m u r d e h t n i d a o l y r d n u a l e c n a l a b d n a k c e h C
Reduce the load.
Problem Cause Solution
Washing machine fails
to ope
●
rate.
Programme is not yet started. Check programme and start it.
Door is not properly closed. Close the door properly.
Machine has not been switched on. Switch the machine on.
Power failure. Check power supply.
Child lock is activa
●
ted. Deactivate child lock.
Washing machine will
not be filled with water. No water. Check water tap.
Inlet hose is kinked. Check inlet hose.
Water pressure is less than 0.03 MPa.
●
Check water pressure.
Door is not properly closed. Close the door properly.
Water supply failure. Ensure the wa
Unblock inlet hose filter.
ter supply.
Machine is d
while being filled.
raining Height of drain hose is below 80 cm. Make sure that drain hose is
properly installed.
Drain hose end could reach into
water.
Make sure the drain hose is not
Make sure the drain hose is pro-
Drainage failure. D
Pump filter is blocked.
rain hose is blocked. Unblock dr
Clean pump filter.
ain hose.
Drain hose end is higher than 100 cm
above oor level.
Strong vibration while
spinning. Not all transportation bolts have
been removed. Remove all transportation bolts.
Applian
●
ce has no solid position. Ensure solid ground and a levelled
position.
Machine load is not correct. Check load weight and balance.
Operation stops
before completing
wash cycle. Water or electric failure. Check power and water supply.
Operation stops for a
period of time. Appliance displays error code. Consider display codes.
Problem due to load pat tern. Reduce or adjust load.
Programme performs soaking cycle. Cancel programme and restart.
Excessive foam floats
drum and/or detergent
drawer.
Detergent is not appropriate. Check detergent recommenda-
tions.
Excessive use of detergent. Reduce amount of detergent.
8.3 Trobleshooting without display code
Water level sensor error.
High voltage protection.
8-Troubleshooting
in water.
perly installed.
Inlet hose filter is blocked.
26
When the voltage is restored,the alarm is
automatically cancelled and the machine
runs normally