background image

22

Maintenance

1.Open the lnlet Grille

2.Detach the standard air filter

3.Attach new Air Purifying Filter

4.Attach the standard air filter

(Necessary installation)

5.Close the Inlet Grille

Close the Grille surely

Open the inlet grille by pushing each ends of
the inlet grille upward.(use thumbs to push
up)

Slide the knob slightly upward to release the
filter, then withdraw it.

Put air purifying filter appliances into the 
right and left filter frames.

Detach old Air Purifying Filter

Replancement of Air Purifying Filter

Note:
(1) the bacteria-killing mediums placed on
     the left side. the multi-lights touching ntermediary 
     is placed on the right side.
(2)the green aspect of the bacteria-killing medium
   air purifying filter will face outside,the white 
    aspect will face to the machine.

NOTE:

The photocatalyst air purifying filter and the 

bacteria-killing medium air purifying filter 

will be used based on real situation.

The photocatalyst air purifying filter will be solarized in fixed time. In normal family, 
it will be solarized every 6 months. The solarization time will last no less than 8 hours 
under the state of abundant sun.

The bacteria-killing medium air purifying filter is available for a long time and neednít 
to be changed. But it must be noticed to use the vacuum cleaner frequently to adsorb 
the dusts covering the purifying filter lest the covering dusts effect the function of the 
bacteria-killing medium air purifying filter. (It is strictly prohibited for the bacteria-killing 
medium air purifying filter to be washed)

Содержание HSU-18CV03(T3)



























Отзывы: