2.The purification function of AIP:
DC high voltage bring high voltage electrostatic field, which
ionize air into positive and negative ion. a great deal of
positive and negative ion adhere to dust passing by, so the
dust become "particle with electric charge". so the dust
passing by adheres to the AIP board under the force from
the electric field, which purifies the unit.
3.When power off, press the purify button, the Remote
controller shows "FAN, low, AIP, and negative ion", and
the TIMER function is available.
Operation
POWER/SOFT
Display board
TEMP./HUMIDITY DISPLAY
HUMIDITY
2.
AIP ionizing purification and negative ion functions
3.Change-for-fresh-air function(optional)
UV light emitted by the UV light device of the indoor unit catalytically
activates the nano TiO2 on the multi-lights touching intermediary,
and the degerming effect is highly efficient and lasting.
Note: when the function is running, don't open the inlet grille.
About UV light degerming function
1.After the change-for-fresh-air function is initiated, the outside air can
enter the indoors through the change-for-fresh-air tube thereby
keeping the indoor air fresh.
About change-for-fresh-air function(optional)
2.Setting the change-for-fresh-air function under the shutdown status:
Under shutdown status, press the fresh key and the remote
controller displays the on status of air flow, low wind, and change-
for-fresh-air functions, and now can set the timing open, timing
close and time control switch. Press on/off button to cancel
the change-for-fresh-air function.
BRIEF INTRODUCTION TO AIR IONIZATION PURIFY AND
HEALTH ANION FUCTION
1.The anion generator in the air conditioner can generate
a lot of anion effectively balance the quantity of position
and anion in the air and also to kill bacteria and speed up
the dust sediment in the room and finally clean the air in
the room.
Press ON/OFF on the remote controller, unit starts.
Press Purify button. " " is displayed on the remote
controller and " " is displayed on the display
board . Air conditioner starts air ionization purify and
health anion function operation.
1.Unit start
When indoor fan motor is running, it has
air ionization
purify and
healthy process function.
For twice press, " " and " "disappear,the operation stops.
Press FRESH button. " " is displayed on the remote
controller and " " is displayed on the display board ,
and the change-for-fresh-air function operation begins.
For twice press, " " and " "disappear,the operation stops.
HEALTH operation
Remote controller
FRESH
PURIFY