Remote controller
2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
Remote controller:
Remote controller:
Then Select FAN operation
3.Fan speed selection
4.Unit stop
About FAN operation
In FAN operation mode, the unit will not operate in
COOL mode but only in FAN mode ,AUTO is not
available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP and POWER/SOFT operation is
not available.
Press ON/OFF button, the unit stops.
LOW
MED
HI
Operation
1. Unit start
Press ON/OFF on the remote controller, unit starts.
Fan Operation
Display board
changes as follows:
AUTO
COOL
DRY
FAN
HEAT
POWER/SOFT
FRESH
TEMP./HUMIDITY DISPLAY
HUMIDITY
PURIFY
