.
This product is designed and manufactured to permit installation in accordance with National Codes.
It is
prevailing local codes and regulations
. The manufacturer assumes no responsibility for equipment
installed in violation of any codes or regulations.
The United States Environmental Protection Agency (EPA) has issued various regulations
may harm the environment and can lead to the imposition of substantial fines. Because these regulations
You should be aware that the use of unauthorized components, accessories or devices may
adversely affect the operation of the air conditioner and may also endanger life and property.
The manufacturer disclaims any responsibility
8.1 OUTDOOR UNIT INSPECTION
8.2 EQUIPMENT PROTECTION FROM ENVIRONMENT
refineries are especially corrosive.
If the unit is to be installed in an area where contaminants are likely to be a problem, special attention
should be given to the equipment location and exposure.
Avoid having lawn sprinkler heads spray directly on the unit cabinet.
In coastal areas, locate the unit on the side of the building away from the waterfront.
Shielding provided by fence or shrubs may give some protection.
Regular maintenance will reduce the buildup of contaminants and help to protect the unit's finish.
! WARNING -
Disconnect all electrical power to the unit before servicing. Disconnect power to both the
8.3 INSTALLATION
regarding the introduction and disposal of refrigerants from this unit
. Failure to follow these regulations
the installer's responsibility to install the product in accordance with National Codes and/or
are subject to revision any repair on this unit should be done by a certified technician.
The manufacturer's warranty does not cover any damage failure caused by the air conditioning system.
components, accessories or devices.
for loss or injury due to the use of such unauthorized
Attach the service panel to the outdoor unit after to prevent.
If the service panel is not attached securely, it could result in a fire or an electric shock due to dust,
water, etc.
This product has been inspected at the factory and released for shipment without known damage. Inspect
oxidation could shorten the unit life. Salt spray or mist in seacoast areas, sulphur or chlorine from lawn
The metal parts of the unit may be subject to rust or corrosion in adverse environmental conditions. This
exterior of carton for evidence of rough handling in shipment. Unpack carefully. If damage is found,
watering systems and various chemical contaminants from industries such as paper mills and petroleum
report immediately to you distributor or the transportation agency.
Structural strength of supporting members
.
the installer's responsibility to insure that the unit is installed in accordance with all local codes.
Clearances and provision for servicing
.
(1) Frequent washing of the cabinet, fan blade and coil with fresh water.
Check the following points before begining any installation:
(2) Regular cleaning and waxing of the cabinet with automobile wax.
(3) An appropriate coil cleaner may be used once per year to remove matter that will not wash off
These units are designed for outdoor installation. They can be mounted on a slab or rooftop. It is
with water.
indoor and outdoor units.
NOTE: There may be more than one electrical disconnect switch. Failure to shut off power can cause
electrical shock resulting in personal injury or death.
The best protection is frequent cleaning and avoiding exposure to debris that blocks airflow.
15
Central Air Conditi
oning
Model: Heat Pump,
HR13-D2
