8
Up & down air direction
Press the up & down button once, the LCD aiflow direction will display as follows:
Cooling/Dehumification/airflow:
Remote controller: Position 1 2 3 4 6
Heating: Position 5 4 3 2 1 6
Remote controller
Auto:
Remote controller:Position
1 2 3 4 5 6
The up & down flade will move according to the above conditions.
Note: Pay more attention to not cut down the power supply because the flade can't back to the
colse position at this circumstance;
Left & right air direction
Press the Left & right button once , the LCD aiflow direction will display as follows:
Remote controller: Position
1 2 3 4 5 6 7 8
The left & right flade will move according to the above conditions
Note: 1. during AUTO mode, pls. don't touch the flade to avoid damaging the inner part of the unit;
2. If the difference between real position & the chart position, press ON/OFF(control panel) button
or ON/OFF( remote controller) button to close the flade and re-open the unit, then it will be normal condition
.
(not availble in these nuits)
(not availble in these nuits)
Up and down
Side from side
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
[COOL/DRY/FA
N/AUTO(COOL)
HAVE NOT]
(AUTO SWING)
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
ON
OFF
TEMP
HEALTH
FAN
MODE
SLEEP
SWING
CLOCK
TIMER
SET
LOCK
LIGHT
RESET
HEAT
2
1
Operation
Air flow adjustment
Swing louvers
(Vertical louvers)
(Horizontal louvers)
