Haier HOR54B7MSW1, Руководство пользователя

Страница: 12 / 12

22 21
TECHNICAL INFORMATION
Complies with AS/NZS regulations EN 50304, AS/NZS60335-1,AS/NZS60335-2-6
standards.
connection type and the power rating of the cooker.
Caution
!
All electrical work should be carried out by a suitably qualified and authorized electrician.
No alterations or willful changes in the electricity supply should be carried out.
Fitting guidelines
The cooker is manufactured to work with three phase alternating current (380-415V 3N~50
Hz). The voltage rating of the cooker heating elements is 220-240V. Adapting the cooker
to operate with one phase current is possible by appropriate bridging in the connection
box according to the connection diagram below. The connection diagram is also found on
the cover of the connection box. Remember that the connection wire should match the
The fixing line connected must be equipped with the all-pole disconnection device
provided by breakaway the contact under overvoltage category III according to the
wiring rules.
Before connecting the cooker to the power supply it is important to read the informatIion
on the data plate and the connection diagram.
Caution
!
Remember to connect the safety circuit to the connection box terminal marked with
.
The connection cable must be secured in a strain-relief clamp.For the connection leads,
the grounding wire must be longer than the other wires.
ELECTRICAL CONNECTION
Main Oven Power(kW) 2.0
TYPE
Dimensions
(height/width/depth) cm
Oven
Top heater(kW)
Grill heater(kW)
Oven illumination(W)
Function modes
Top+bottom heater(kW)
Top/grill+Fan(kW)
Electrical Input(V)
Top Oven Power(kW)
180mm Hilight heater(kW)
145mm Hilight heater(kW)
Cooktop
90/54/60
5
0.85
1.1
25
50-250
℃
1.8
1.2
HOR54B7MSW1
Guide levels
Bottom heater(kW)
Oven light(W)
Top heater(kW)
Bottom heater(kW)
Top+bottom fan(kW)
Fan(W)
Fan+Rear heater(kW)
Fan+Half grill(kW)
Fan+Bottom heater(kW)
Temperature
Frequency(Hz)
Hotplate power(kW)
Total connected power(kW)
1.15
50
2.0
6.0
10.0
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
Wire must be connected to the E terminal.
Recommended
type of
connection
lead
1
L1
N E
H05VV-F3G4
2
For 380-415/220-240V earthed three-phase
connection, bridges connect 4-5 terminals,
phases in succession 1,2
and 3, earth to
4-5, the safety wire to
.
N N E
L1 L1 L2 L3
H05VV-F5G1,5
L1=R, L2=s, L3=T, N=null terminal, E=safety wire terminal
1 2 3
4
For 220-240V earthed one-phase connecti-
bridges connect 1-2-3 on, terminals and
4-5 terminals, safety wire to
.
3N ~50Hz
220-240V/ 380-415V
25
2.0
2.0
30
2.0
2.0
1.1
1.15