1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the freezer accessories inside and
outside.
2. Inspect and remove any remains of packing, tape or printed
materials before powering on the freezer.
t:PVSGSFF[FSJTEFTJHOFEGPSGSFFTUBOEJOHJOTUBMMBUJPOPOMZ
It should not be recessed or built-in.
t1MBDFUIFGSFF[FSPOBGMPPSTUSPOHFOPVHIUPTVQQPSUJUGVMMZMPBEFE
t8IFONPWJOHUIFGSFF[FSOFWFSUJMUJUNPSFUIBOBEFHSFFBOHMF
This could damage the compressor and the sealed system.
t*GUIFGSFF[FSJTUJMUFEMFUJUTUBOEJOBOVQSJHIUQPTJUJPOGPSBUMFBTU
hours prior to plugging. This is to allow the refrigerant to settle.
t5PBTTVSFZPVSGSFF[FSXPSLTBUUIFNBYJNVNFGGJDJFODZJU
was designed for, you should install it in a location where there
is proper air circulation, plumbing and electrical connections.
t5IFGPMMPXJOHBSFSFDPNNFOEFEDMFBSBODFTBSPVOEUIFSFGSJHFSBUPS
Sides……………4” (102mm)
Back..................4” (102mm)
Installing Your Freezer
Unpacking Your Freezer
Adjusting Your Freezer
Proper Air Circulation
English
5