background image

MAINTENANCE SERVICE AND TROUBLE SHOOTING

It is the water remained in the factory
inspection of performance.

Common phenomena

Phenomena                                                  Explanation

The program is setting the drain time. Some
 time is needed before it starts spinning.

There may be some water flowing out of 
the drain hose in the first use of the machine.

Press  the  "Process " button  to 
select "Spin", but it doesn't work.

In pre-wash , the washer stops 
running,t

he numeral tube 

shows

E0

The safety switch acts. The
 spinning can not work (after 
amending twice automatically)

The numeral tube shows

E3

Not supplying water 

The numeral tube shows 

E4

or the speed

is too slow 

the suitable water 

level doesn't research about 15
minutes.

The draining does not work, or 
the speed of draining is too slow 
,

The numeral tube shows

E1

(exclude in peedy).

The machine stops running In
washing ,rinsing or spinning.

The numeral tube shows E2

Is the power off?

Does the power cord loose?

Does soft wash program selected?

The top lid is not closed.

The top lid is not closed.

Close the top lid.

Close the top lid.

Are the laundries put slantingly?

Re-order the laundries. Close the 
top lid. 

The water faucet is not open or 
supplying  water is stoped.

The water inlet valve is blocked.

Clean the water inlet valve .
Push the "Start/Pause" button.

Open the water faucet.
Push the "Start/Pause" button.

Is the drain hose blocked  by foreign
 material?

Is the spout blocked  by foreign 

Clean the foreign material.

Select the soft wash ,it's normal.

Is the machine slanting?

Is some metal inside the washer?

Are the laundries slanting  in 
spinning?

Is the jointer screw of  the water inlet
 hose  loose or twisted awry?

Insert the power plug tightly.

Use it when the power is on.

Level the machine properly.

Re-order the laundries.

Fasten the fastener or zip up the zip.

Fasten the jointer screw properly.

The water faucet leaks.

The machine does not act.
(Indicators are off.)

The waterfall current is poor or 
out.

There's abnormal sound inside
 the machine.

Is the machine slanting?

Level the machine in right position.
Open and close the top lid once.

Phenomenan                The reason                            How to settle

C

T

rouble alarm and solve method 

T

Open and close the top lid once.

The numeral tube shows 

F2

Please contact the after-sales
     service department.

Overflow alarm

17

Содержание HLT364XXQ - Genesis Washer



























Отзывы: